Original Striping Brush Head (LL-OSBH)
This is our original striping brush head. Designed for long, straight lines, it has a full belly to hold a lot of paint, yet is still agile enough for turns and curves. A great all-around striping brush!
Available in sizes 00, 0, & 1
QM Grey Quill with a pink Lacquered Handledesigned by Paul Quinn The "extended" quill for curley q's, stripes and letters of all types. Available in sizes 1, 2, 3, 4, 5, 6, 8, 10 - SEVERAL NEW SIZES (see chart below)
The Cabriolet is made of the finest German squirrel hair in a shorter length. It's super versatile and is great for design work, turning corners as well as straight lines. Available in sizes 00, 0, & 1
This new brush is a "work horse!" It's designed for long stripes. The squirrel hair comes from China and it is softer than the traditional Siberian squirrel hair. This is the same hair we use in our #10 Original Mack Striping Brush. It's a very "fast" brush and lays out long lines. DeWayne is also featured in our Pinstripers Hall of Fame: Award #24 Series 1310
The latest brush in our arsenal, the Black Plague is simply the coolest scroll brush available! Black chrome ferrule with Taklon hair, available in 5 sizes. This series is a full synthetic filament mixture.
"The Rhino Fitch was developed to have the softness to paint on smooth surfaces, hold a good amount of paint, keep their snap, but have the stiffness to work on rough surfaces such as coating sandblasted signs and wall lettering and pictorials. They are great for blending, lettering, stippling, faux finishes, cutting clean lines and pictorial painting on any surface. True to its namesake this brush is tough and durable." -- Gary Anderson Bloomington Design Available in 6 sizes (see chart below) Series 4080 & 4085
America's No.1 Automotive Touch-Up Brush
Used by all leading Body Shops for Paint Touch-Up and PinstripingFinest Quality Squirrel Hair Stripers Made
- Lacquer and enamel resistant
- The sword style is the best for all-around work
- Excellent for auto body touch-up and pinstriping
- Dark green thread ferrule
Introducing Lazer Lines first synthetic striper! This brush is named well as it will withstand high winds and most types of environments. This brush is also made of Taklon hair. We chose this hair for our synthetic striper because the Taklon hair has performed so well with other brushes during product development! After using the Scarlet Fever for the first time, Robert knew this hair would make a great striper as it holds a lot of paint and appeared to hold up under all types of weather. If humidity and wind interfere with your striping, then you might want to give this brush a try! Available in sizes 000, 00, 0, & 1 This series is a full synthetic filament mixture.
The Jenson's Swirly Q brush is designed for scroll striping and script lettering with enamel based paints. Scroll striping requires thinner paint. If mineral spirits were to be used, the paint would run easier. I recommend using a slow drying automotive reducer for thinning enamel based paints. These can be purchased at your local autobody supply. Clean the brush thoroughly with reducer before and after each use. Never use lacquer thinner! Always store your brush in mineral oil between uses. - Gary Jenson Both Sizes Have The Same Diameter. However The JS-1 is 1 7/16" Out and The JS-2 is 1 11/16" Out. Available in 2 sizes