The new Domini-Quinn striping brush takes its cues from the legendary “Dominican”, arguably one of the finest brushes to ever lay a line. Mack Brush has teamed up with Paul Quinn to recreate this brush of legend! From the length of the hair to its ultra thin ferrule, this brush pulls lines with the precision of a razors edge!
Available in sizes 00, 0, & 1
Tom Kelly's grandfather, O.Z. Crozier, (aka) "The Baron" of Baron Roth & Kelly started striping wagons and buggies for the Studebaker Bros. in the early 1900's. He then striped at the Ford Motor Co. for over 25 years through the 20's-30's and part of the 40's. In the early 50's when striping returned to cars in a custom style, I asked the Baron to stripe my friend's car and he did. My grandfather thought it might be good to go into business striping and he asked me, Kelly, to work with him, so I did. I've been striping every day for the last 53 years. The only brush the Baron and I have ever used is a #1 & #2 Mack Sword Striper from the Andrew Mack Brush Co. For all the new stripers coming into the business, don't be afraid to use a larger brush, you can do anything the smaller brush can do, but the larger brush will go further on a single load of paint. Available as a set or individual sizes 1 & 2
What makes the XCaliber special is it's short hair length. Only 1 1/2" vs. the average 2" and 2 1/4". This shorter length allows greater control for intricate designs, as well as long lines. Available in sizes 0000, 000, 00 & 0
"Once upon a time in Michigan, Texas, and California, lived a lazy pinstriper. He wanted to make a lot of money fast. This pinstriper was busy with dealer lots, asphalt, dirt, and gravel. He pinstriped 20-30 cars per day in sun, rain, and wind. He started with a Grumbacher 1010, but when the wind blew, the little brush was taken by the wind. He wanted a brush the wind would not bother. He called Grumbacher and they made him a brush with taklon bristles. All was well, but the lazy pinstriper was still not happy. He now wanted to pull longer lines. He called Grumbacher again, but they sent him too short of a brush. He was told they had been conquered by the evil Kohinoors. The lazy pinstriper contacted the Maine Brush Company, but the Maine Brush Company was also conquered. The search continued for the magic bristle, leading the lazy pinstriper to the Andrew Mack & Son's Brush Company. Other brush makers suggested a blend of natural and synthetic bristles. The blend was highly sought after, a rare commodity, and soon to be extinct. He called Chris at Andrew Mack & Son Brush Company and cried, "Woe is me! These other nitwits forgot the formula and can't find the hair (or their ferrules either). The mighty Chris said, “Have no fear, I have an idea!” There is a new taklon and we can do it! After much trial, the Longstriper 1111 was created, the homage to the Grumbacher 1010 as per Spinal Tap where their amps went to 11. If you do commercial work, you are going to love these. This is the best straight line brush I have ever used. Moisture has no effect on this brush and the wind's 20mph is no match for this brush." -Michael Menard Available in sizes 00, 0, & 1 (#1111)
Andrew Mack & Son Brush Company has teamed up with Todd Hanson to create a brush called the "King 13" which is offered in sizes 00000, 000, 00, and 0.We use a 60mm Chinese blue squirrel hair for the 00000 and 000 giving the brush a total length of 1 3/4". We use a 64mm hair for the 00 and 0 which gives the brush a total length of 2". The brush has more pull in the making process giving it a little more taper than a traditional striper. The amount of hair that is distributed onto the handle during the making process is configured differently than our series #10 or #20 brushes. For example, the 00000 and 000 are made on a #00 handle, the 00 is made on a #0 handle, and the 0 is made on a #1 handle. Our technicians are applying the same amount of hair for a say a #00 brush but putting it on a handle that has a larger surface area. Available in sizes: 0000000, 00000, 000, 00, 0 & 1
Exactly like the "Mack-Lite," only more belly to the shape in order to carry more paint. Made with kazan squirrel hair. Length out is graduated from 1 5/8" to 2". Available in sizes 00, 0, 1 & 2
Glawson/Mack Extra Long Striper
- Wood handle
- Brass ferrule
- Pure blue squirrel hair.
- This brush is shaped like a fast-lite striper.
- Available in sizes #1 (New Size), #0 & #00.
- Both sizes have a hair length out of 2 1/4".
Similar to the "Mack-Lite," only the hair length is longer, and it is made with blue squirrel hair. Length out is graduated from 1 7/8'-2 1/4'. Available in sizes 00, 0, 1 & 2